LJ-100 Reverse Osmosis Membrane Antiscalant

LJ-100 It is a highly effective composite formulation antiscalant for reverse osmosis systems. It exhibits excellent scale inhibition performance, has a wide range of applications, and delivers outstanding scale-inhibiting and dispersing effects on conventional water qualities. It is particularly suitable for scaling caused by precipitates of carbonates, sulfates, calcium chloride, magnesium oxide, and iron oxide. This antiscalant boasts high scale-inhibition efficiency and does not coagulate with residual coagulants or aluminum- and iron-rich compounds, nor does it form any coagulation products. It can be used in reverse osmosis systems without prior ion-exchange pretreatment. ( RO ) Nanofiltration (NF) or ultrafiltration (UF) Prevent scaling in the system and improve water production rate and water quality.

Description

Product Features

(1) Effectively controls inorganic scale formation within a high-concentration range, under conditions without the addition of acid. LSI The maximum allowable value is 2.8

(2) It does not coagulate with iron and aluminum oxides or silicon compounds to form insoluble substances.

(3) Compatible Global Various types of reverse osmosis products manufactured by major suppliers CA And TFC Membrane, nanofiltration membrane, and ultrafiltration membrane 

(4) Water supply ph Value in 5-10 Valid within the scope.

 

Technical indicators

Project Indicator
Appearance Colorless, clear, and transparent liquid
Main ingredient Phosphorus-containing small-molecule organic compounds
pH (1% aqueous solution) 2.0 ± 1.0
Density (20℃), g/cm³ 1.05 ± 0.02

 

Instructions for use

Dosage point: To achieve maximum efficacy, LJ-100 It is best to add the scale inhibitor before the mixer or the security filter. When preparing the solution, be sure to stir thoroughly. 5-10 Minutes—regularly clean the dosing tank to prevent bacterial growth.

Dosage: The required dosage is determined based on the operating conditions of each individual unit and should be adjusted according to the influent water quality. Water quality , temperature, System The appropriate dosage is calculated based on factors such as the recovery rate and the type of reverse osmosis membrane. The recommended dosage is: 2-6PPM

Specifically Please consult Prio’s technical engineers to determine the dosing points and dosing amounts based on your specific system conditions. In certain systems, specific dosing points and injection equipment are essential.

Dilution: LJ-100 The scale inhibitor product is a standard solution that can be added directly or used after dilution. Dilution must be performed using… R0 Produced water or desalinated water—recommended dilution multiples are: 10 Twice  The dilution factor should not exceed 20 Twice.

Packaging, Storage, Transportation, and Precautions

Packaged in plastic buckets, 25kg/ Barrel, 200kg/ The bucket or determined according to user needs.  Store in a cool, dry place. Shelf life: twelve months. During handling, pay attention to occupational safety measures and avoid contact with skin, eyes, and other sensitive areas. If contact occurs, rinse thoroughly with plenty of water.

Expert chemists performing
rigorous quality validation